Discount Pool Cover: Loop-Loc for Less!

Pool Cover Installation Projects

New mesh cover over unused vinyl liner pool

1. Vinyl liner pool had been unused for several years. Pool owner wanted to cover pool for aesthetic and safety reasons.	2. Bucket liners filled with water and spaced around pool perimeter, one bucket per strap. Cover unfolded and held in position with two bucket liners.

3. Working outward in two directions from the starting point: Cover is slowly pulled up out of the empty pool and into position on the pool deck.	4. Cover almost completely out of pool and up on the deck.

5. Cover in position and stretched tight, ready for anchors to be drilled at end of each strap.	6. Anchor holes drilled, anchors installed, springs buckled to straps and adjusted. Strap/spring assembly attached to anchors and cover put under tension.
Return to installation index page>